Four-axis foam eva tape round knife roll cutting machine
Product Description
Machine Features:
1. Sensor
2. Can be used as unwinder or rewinder by adjust the operation direction of clockwise or counterclockwise
3. Operation is easy
It can hold several narrow strips synchronously based on your material width.
Characteristics:
This unwinding and rewinding machine equipped with adjustable speed motors, easy to operate.
Application:
Unwinding and rewinding for roll material, it's widely applied in laminating, slitting and die cutting for shield materials,
sticky materials, insulating materials, conductive materials, electronic materials.
After-service:
1. Warranty for machines is 12 months
2. A promptly reply within 24 hours
3. Free usage training before delivering machines in factory
Characteristics:
1. This machine employs microcomputer controller to set flat cable cutting length.
2. The cutting length is accurate.
3. Operation is easy.
4. Waste rate is low.
5. Manufacturing experience: 30 years
6. Export experience: 10 years
Application:
Set cutting size for luggage cases, pp belt, leather belt, rope belt, adhesive label, velcro, zipper, sleeve, paper, flat cable, small wire, metal film, ribbon etc
| Cutting Material Width |
1300mm |
Cutting Width |
1mm~1300mm |
| Inner Dia.of Cutting core |
3"(25mm~76mm Customized) |
Cutting Accuracy |
± 0.1mm |
| Cutting Max.Dia. |
160mm |
Dimension |
3.35m*1.75m*1.61m |
| Maximum Cutter Dia. |
200mm |
N.Weight |
2700 KGS |
| Voltage |
380V 50HZ(Customized available 220V) |
Power |
9 KW |
| No. |
Host Configuration |
Configuration Specification |
Quantity |
| 1 |
Bearing |
Machine Bearing NSK from Japan |
1 set |
| 2 |
Low Voltage Protection |
Leakage protection switch |
1 set |
| AC contactor |
1 set |
| Switching Mode Power Supply |
1 set |
| Electric Relay |
1 set |
| 3 |
Function of Electric Cooker |
6 Cutting Scenarios One-click Conversion |
1 set |
| 4 |
Host Setting Device |
10"Flip Type Touch Screen |
1 set |
| 5 |
Control System |
12 Mode Settings (Open End),Intelligent three-segment speed control |
1 set |
| 6 |
PLC |
Programming Controller + Extension Module |
1 set |
| 7 |
Main Orientation of Cutter |
C5 Grade Precision ball screw drive |
1 Group |
| 8 |
Cross main feed positioning |
C5 Grade Precision ball screw drive |
1 Group |
| 9 |
Trailer Sliding |
Straight Line Slide |
2 Groups |
| 10 |
Control Handle |
Cross-switch |
3 pcs |
| 11 |
Photoelectric Switch |
Photoelectric Switch |
6 pcs |
| 12 |
Main spindle motor inverter |
7.5P Variable Frequency Converter |
1 Group |
| 13 |
Blade motor inverter |
5.5P Variable Frequency Converter |
1 Group |
| 14 |
Transverse positioning of cutter |
1000W Servo Motor Driver |
1 set |
| 15 |
Blade feed drive |
1000W Servo Motor Driver |
1 set |
| 16 |
Flip Positioning |
1000W Servo Motor Driver (
Expanding 50:1 High-torque Output ) |
1 set |
| 17 |
Cutting Blade Electric Motor |
380V 50HZ 3P-4H a-c dynamo |
1 set |
| 18 |
Main Shaft Motor |
380V 50HZ 5.5P-6H a-c dynamo |
1 set |
| 19 |
Sheet Metal Paint |
Imported powder spray paint |
1 set |
| 20 |
Lighting System |
24v LED Lighting |
1 set |
| 21 |
Refrigerating System |
90W No drip leakage in water pump |
1 Group |
| 22 |
Tail bracket |
Magnetic cylinder |
1 set |
| 23 |
Triple combination |
Lilter water vapor and regulate air pressure |
1 Group |
| 24 |
Cutting Shaft |
Diameter 76 mm Cutting Shaft |
6 pcs |
| 25 |
Swing angle system |
Step Auto Swing Angle |
1 set |
| 26 |
Clamping Device |
Pneumatic piston automatic claw |
4 sets |
| 27 |
Feed Hopper |
Stainless Steel Hopper |
1 set |
| 28 |
Round Blade |
200mm Double-edged Blade |
2 pcs |
| 29 |
Random Accessories |
Cut Sleeve PE Tube |
4 pcs |
| 30 |
Service Tools |
General Maintenance Tools |
1 set |
| 31 |
Clip Cutter |
Dia.80 mm |
2 sets |
Company Profile
Audited Supplier 
){kind=link}
){kind=link}